CEM Specialties Inc.

Process & Emission Monitoring Specialists

Search For:

CEM Specialties Inc. 1100 Dearness Drive London, Ontario
Canada  N6E 1N9
Tel: 519-681-9595
Fax: 519-681-8799
Toll Free: 1-866-236-7732
admin@cemsi.on.ca

Back to Products

D-FW 230 - Filter / Baghouse Monitor
D-FW 231 - Filter / Baghouse Monitor
D-FW 235 - Portable Filter / Baghouse Monitor
D-FW 240 - Filter / Baghouse Monitor

D-FW 230 - Filter / Baghouse Monitor

Type:	Filter Monitor with control unit
Description:	Filter monitoring based on the tribo-electric measuring principle; Ideal for baghouse monitoring; Continuous in-situ measurement; Compact design Sturdy construction, no moveable parts; Easy, straightforward installation and operation; Fast on-line performance check capability; Minimal maintenance requirements early detection of filter malfunction; Reduces filter replacement costs.
Applications:	Broken bag detector with control unit
Compliance:	TÜV approved for qualitative emissions monitoring
Measuring range:	Qualitative measurement
Flue gas temperature:	Above dew point, 200°C, higher on request
Measured components:	Dust burden
Measuring principle:	Tribo electric
Measuring path:	> 0.1 m
Measuring output:	0/4...20 mA analog output
Protection:	IP 65
Ambient temperature:	-20°... +50°C
Status/control signals:	Relay outputs for status signals
System components:	Probe and operating unit
Test functions:	Manual zero check
Download:	D-FW 230 Brochure

D-FW 231 - Filter / Baghouse Monitor

Type:	Filter Monitor, probe version
Description:	Filter monitoring based on the tribo-electric measuring principle; Ideal for baghouse monitoring; Continuous in-situ measurement; Compact design Sturdy construction, no moveable parts; Easy, straightforward installation; Fast on-line performance check capability; Minimal maintenance requirements early detection of filter malfunction; Reduces filter replacement costs.
Applications:	Broken bag detector
Compliance:	TÜV approved for qualitative emissions monitoring
Measuring range:	Qualitative measurement
Flue gas temperature:	Above dew point, 200°C, higher on request
Measured components:	Dust burden
Measuring principle:	Tribo electric
Measuring path:	> 0.1 m
Measuring output:	0/4...20 mA analog output
Protection:	IP 65
Ambient temperature:	-20°... +50°C
System components:	Probe
Test functions:	Manual zero check
Download:	D-FW 230 Brochure

D-FW 235 - Portable Filter / Baghouse Monitor

Type:	Mobile Filter Monitor with three probes, a strip chart recorder and additional accessories in a portable case
Description:	This monitoring system consists of a D-FW 231 filter monitor with three probes, a strip chart recorder and additional accessories in a portable case. The system, with overall dimensions of 520x205x460 mm and a weight of 13.5 kg can be easily installed, even in locations that are not very accessible. Three different sensor probes are supplied so that the monitor will be suitable for a wide range of applications.
Applications:	Portable broken bag detector
Compliance:	TÜV approved for qualitative emissions monitoring
Measuring range:	Qualitative measurement
Flue gas temperature:	Above dew point, 200°C, higher on request
Measured components:	Dust burden
Measuring principle:	Tribo electric
Measuring path:	> 0.1 m
Measuring output:	0/4...20 mA analog output, connected to built-in recorder
Protection:	Probe IP 65, box with lid closed: IP54
Ambient temperature:	-20°... +50°C
System components:	Box with three probe lengths and data recorder
Test functions:	Manual zero
Download:	DF-W 230 Brochure

D-FW 240 - Filter / Baghouse Monitor

Type:	Filter Monitor for monitoring in hazardous locations
Description:	Filter monitoring based on the tribo-electric measuring principle; Ideal for baghouse monitoring in hazardous locations; Continuous in-situ measurement; Compact design Sturdy construction, no moveable parts; Easy, straightforward installation; Fast on-line performance check capability; Minimal maintenance requirements; Early detection of filter malfunction; Reduces filter replacement costs.
Applications:	Broken bag detector in hazardous locations
Compliance:	Ex II 2 G/D EEx d ib IIC T6 td A21 ibD21 IP65 T 105°C, for zones 1/2 gas, 21/22 dust
Measuring range:	Qualitative measurement
Flue gas temperature:	Above dew point, 200°C, higher on request
Measured components:	Dust burden
Measuring principle:	Tribo electric
Measuring path:	> 0.1 m
Measuring output:	0/4...20 mA analog output
Protection:	IP 65
Ambient temperature:	-20°... +50°C
System components:	Probe
Test functions:	Automatic zero check
Download:	Contact us for more information.

con
Top of Page

CEM SYSTEMS

PROCESS ANALYTICS

SERVICES

APPLICATIONS QUESTIONNAIRE

LABORATORY ANALYTICS